ASTRO 3U VPX
Integrating Slipstream Design’s, AMD (Xilinx) Zynq UltraScale+ RFSoC Gen 3 ASTRO module, the ASTRO 3U VPX is a SOSA-aligned RF digitiser and processor module.
Intended for high-bandwidth Software Defined Radio (SDR), radar, electronic warfare, and multi-channel RF capture applications.
Subscribe to our Mailchimp Newsletter for ASTRO Updates
-
ASTRO 3U VPX SOSA-Aligned RF Digitiser and processor based on the AMD UltraScale+ RFSoC Gen3, highly integrated, extended memory capture built in, with easy access 8 TX and 8 RX front panel ports.
Core RF Processor – ASTROÂ
Please visit ASTRO’s product page for all the information on the 3U VPX RFSoC core
Core RF FunctionsÂ
- 8-channel RF ADC & DAC
- 6 GHz bandwidth
- RF port protection with integrated balun and limiter protection
- Integrated clocking and synchronisation features including optional GNSS Module for onboard reference
Core Memory & Storage
Memory to be defined at time of order*
- DDR4 SDRAM:
- PS – 32 Gbit (8 GB)
- LS – 32 Gbit (8 GB)
- Non-volatile Storage:
- eMMC – 16 GByte (Option up to 128 GB)
- QSPI – 4 Gbit (Dual 2 Gbit)
- SD Card – 32 GB*
- SSD – 2 TB* (M.2 NVMe 2230 or 2242)
Data Back Plane Interfaces
- Data Plane:
- PCIe Gen 4 x8
- 100 GigE Fibre Optic via Samtec Firefly
- Control Plane:
- Ethernet 1 GigE
- IPMI system management option
- JTAG, UART, GPIO
Clocking & Synchronisation
- Clock Source:
- Internal low-jitter RF system clock
- External reference clock input
- Timing / Synchronisation:
- IEEE 1588 / PTP Support
- SYSREF, sync, and trigger input / outputs
- Multi-Board Sync:
- Backplane clock and timing support for phase coherence across modules
VPX Front Panel
- RF Interface:
- 8 TX, 8 RX 50Ω
- DAC, ADC sample clocks
- SYSREF, SYNC (Single Ended)
- Balun with internal limiter protection circuit
- Connectors:
- Samtec – GPPC-PF1-10-EG-RA-SM
- GPIO Interface:
- GPIO Expansion interface including voltage
supply
- GPIO Expansion interface including voltage
- LEDs:
- Power
- Status
- Debug
- Ethernet
Back Plane InterfacesÂ
- VPX-P0:
- IPMI system management Option (VITA 46.11)
- Power, JTAG
- VPX-P1 Data Plane:
- PCIe Gen4 x8 (PL)
- Ethernet 1 GigE (PS)
- External reference clock input
- GPIO, UART
- VPX-P2:
- 100 GigE (Via Optional Samtec Firefly)
- Options on VITA 67 backplane, see ordering
- GPS antenna RF Port
Engineering HatchÂ
- SD Card Slot
- Boot Mode Select Switches
- JTAG, GPIO, UART, via FPC
Customisation available on request
-
For full details on the following areas, please download our datasheet from the top of the page:
- Mechanical Specification
- Power Requirements
- Standards Compliance
- VITA Compliance
- Environmental
- System Diagram
- System Interface Diagram
- Firmware & Software Support
FPGA AMD RFSoC XCZU48DR-2FFVG1517I (Variants and Speed Grade Options)
Quad Core (4x) ARM® Cortex -A53 MPCore – 1.3GHz
Dual Core (2x) ARM® Cortex -R5F MPCore – 533MHz
8x 14 bit 5 GSPS RF-ADC
8x 14 bit 10 GSPS RF-DAC
1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x, 16x, 20x, 24x, 40x Decimation / Interpolation
8x SD-FEC cores (ZU48 only)
2x PCIeGen3 x16/Gen4 x8Digital System Clocking Configurable, see clocking architecture page of datasheet (available to view above) FMC Connector SAMTEC: SEAM-40-03.5-L-14-1-A-K-TR
VITA 57.4 (FMC+)RF Connector Differential
3dB Passband 6GHz
1Vp-p into 100 ohmTemperature -40°C to +70°C (dependent on cooling arrangement) Operational Humidity Up to 95% (non-condensing) Conformal Coating As required for customisation, Polyurethane / Acrylic EMC, Vibration On request -
Item Part # Description 40GHz RF Cable Assembly 644-0059 Multi-Port 10way SMPM to SMA Cable Assembly 305mm —Non Phase Aligned. Two off required. 40GHz RF Cable Assembly 644-0058 Multi-Port 10way SMPM to SMA Cable Assembly 305mm —Phase Aligned. Two off required. -
The following defines a series of common order codes for the ASTRO 3U VPX module:
Model: 010-0008
Description: 3U VPX ASTRO RFSOC
Selection Code: 010-0008-[A]-[B]-[C]-[D]-[E]-[F]-[G]
Build Code Description / Part # Standard Part Number Standard 010-0008-A1-B1-C1-D1-E1-F1-G1 VPX Base Board A A1 = 020-0082 ASTRO Processor Module B B1 = 020-0062-ZU48-2-I-N-8GB SD Card Module C C1 = None,
C2 = 32 GB MicroSD Card, Kingston – SDCIT2/32GB (-40 to +85 °C)M.2 SSD Module D D1 = None,
D2 = 2TB M.2 2230 – Crucial P310 2TB PCIe Gen4 NVMe 2230 M.2 SSD
D3 = 2TB M.2 2242 – Swissbit -SN3000MB1T92I-2MA2-2GB-STD (-40 to
+85 °C)Optics Module E E1 = None,
E2 = Samtec Firefly 100Gbps* with TE Connectivity 2359410-1
*4TX 4RX 25Gbps extended temperature optical micro flyover cable
assembly MT ferrule termination with TE ferrule kit 2355002-1GNSS Module F F1 = None,
F2 = GNSS Module, backplane TE connectivity 2359410-1Custom Options G G1 = None
ASTRO 3U VPX SOSA-Aligned RF Digitiser and processor based on the AMD UltraScale+ RFSoC Gen3, highly integrated, extended memory capture built in, with easy access 8 TX and 8 RX front panel ports.
Core RF Processor – ASTROÂ
Please visit ASTRO’s product page for all the information on the 3U VPX RFSoC core
Core RF FunctionsÂ
- 8-channel RF ADC & DAC
- 6 GHz bandwidth
- RF port protection with integrated balun and limiter protection
- Integrated clocking and synchronisation features including optional GNSS Module for onboard reference
Core Memory & Storage
Memory to be defined at time of order*
- DDR4 SDRAM:
- PS – 32 Gbit (8 GB)
- LS – 32 Gbit (8 GB)
- Non-volatile Storage:
- eMMC – 16 GByte (Option up to 128 GB)
- QSPI – 4 Gbit (Dual 2 Gbit)
- SD Card – 32 GB*
- SSD – 2 TB* (M.2 NVMe 2230 or 2242)
Data Back Plane Interfaces
- Data Plane:
- PCIe Gen 4 x8
- 100 GigE Fibre Optic via Samtec Firefly
- Control Plane:
- Ethernet 1 GigE
- IPMI system management option
- JTAG, UART, GPIO
Clocking & Synchronisation
- Clock Source:
- Internal low-jitter RF system clock
- External reference clock input
- Timing / Synchronisation:
- IEEE 1588 / PTP Support
- SYSREF, sync, and trigger input / outputs
- Multi-Board Sync:
- Backplane clock and timing support for phase coherence across modules
VPX Front Panel
- RF Interface:
- 8 TX, 8 RX 50Ω
- DAC, ADC sample clocks
- SYSREF, SYNC (Single Ended)
- Balun with internal limiter protection circuit
- Connectors:
- Samtec – GPPC-PF1-10-EG-RA-SM
- GPIO Interface:
- GPIO Expansion interface including voltage
supply
- GPIO Expansion interface including voltage
- LEDs:
- Power
- Status
- Debug
- Ethernet
Back Plane InterfacesÂ
- VPX-P0:
- IPMI system management Option (VITA 46.11)
- Power, JTAG
- VPX-P1 Data Plane:
- PCIe Gen4 x8 (PL)
- Ethernet 1 GigE (PS)
- External reference clock input
- GPIO, UART
- VPX-P2:
- 100 GigE (Via Optional Samtec Firefly)
- Options on VITA 67 backplane, see ordering
- GPS antenna RF Port
Engineering HatchÂ
- SD Card Slot
- Boot Mode Select Switches
- JTAG, GPIO, UART, via FPC
Customisation available on request
For full details on the following areas, please download our datasheet from the top of the page:
- Mechanical Specification
- Power Requirements
- Standards Compliance
- VITA Compliance
- Environmental
- System Diagram
- System Interface Diagram
- Firmware & Software Support
| FPGA AMD RFSoC | XCZU48DR-2FFVG1517I (Variants and Speed Grade Options) Quad Core (4x) ARM® Cortex -A53 MPCore – 1.3GHz Dual Core (2x) ARM® Cortex -R5F MPCore – 533MHz 8x 14 bit 5 GSPS RF-ADC 8x 14 bit 10 GSPS RF-DAC 1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x, 16x, 20x, 24x, 40x Decimation / Interpolation 8x SD-FEC cores (ZU48 only) 2x PCIeGen3 x16/Gen4 x8 |
| Digital System Clocking | Configurable, see clocking architecture page of datasheet (available to view above) |
| FMC Connector | SAMTEC: SEAM-40-03.5-L-14-1-A-K-TR VITA 57.4 (FMC+) |
| RF Connector | Differential 3dB Passband 6GHz 1Vp-p into 100 ohm |
| Temperature | -40°C to +70°C (dependent on cooling arrangement) |
| Operational Humidity | Up to 95% (non-condensing) |
| Conformal Coating | As required for customisation, Polyurethane / Acrylic |
| EMC, Vibration | On request |
| Item | Part # | Description |
|---|---|---|
| 40GHz RF Cable Assembly | 644-0059 | Multi-Port 10way SMPM to SMA Cable Assembly 305mm —Non Phase Aligned. Two off required. |
| 40GHz RF Cable Assembly | 644-0058 | Multi-Port 10way SMPM to SMA Cable Assembly 305mm —Phase Aligned. Two off required. |
The following defines a series of common order codes for the ASTRO 3U VPX module:
Model: 010-0008
Description: 3U VPX ASTRO RFSOC
Selection Code: 010-0008-[A]-[B]-[C]-[D]-[E]-[F]-[G]
| Build | Code | Description / Part # |
|---|---|---|
| Standard Part Number | Standard | 010-0008-A1-B1-C1-D1-E1-F1-G1 |
| VPX Base Board | A | A1 = 020-0082 |
| ASTRO Processor Module | B | B1 = 020-0062-ZU48-2-I-N-8GB |
| SD Card Module | C | C1 = None, C2 = 32 GB MicroSD Card, Kingston – SDCIT2/32GB (-40 to +85 °C) |
| M.2 SSD Module | D | D1 = None, D2 = 2TB M.2 2230 – Crucial P310 2TB PCIe Gen4 NVMe 2230 M.2 SSD D3 = 2TB M.2 2242 – Swissbit -SN3000MB1T92I-2MA2-2GB-STD (-40 to +85 °C) |
| Optics Module | E | E1 = None, E2 = Samtec Firefly 100Gbps* with TE Connectivity 2359410-1 *4TX 4RX 25Gbps extended temperature optical micro flyover cable assembly MT ferrule termination with TE ferrule kit 2355002-1 |
| GNSS Module | F | F1 = None, F2 = GNSS Module, backplane TE connectivity 2359410-1 |
| Custom Options | G | G1 = None |
Discover More of the ASTRO Hardware Ecosystem
-
ASTRO (RFSoC SOM)
ASTRO, a breakthrough standalone Radio Frequency System On Chip (RFSoC), for highly adaptable RF processing in one unique RF module based on the Zync Ultrascale+ Gen 3
-
ASTRO Nova (PCIe)
Our ground-breaking ASTRO Nova platform, a revolutionary Direct RF on-the-edge processor module, addresses the need for reconfigurable communications infrastructure.